Cisco Systems C3850NM210G manual StackPower Cabling Configurations, Part Number Cable Type Length

Page 43

Chapter 2 Switch Installation

StackPower Cabling Configurations

•Size of the switch and any optional power supply module. The 1100-W power-supply module is 1.5 inches (3.81 cm) longer than the other modules, and with the attached cable retention clip, it extends 3 inches (7.62 cm) from the switch chassis. Stacking switches with the same power-supply modules together makes it easier to cable the switches. For switch dimensions, see Appendix A, “Technical Specifications.”

•Length of cable. Depending on the configurations that you have, you might need different-sized cables. If you do not specify the length of the StackPower cable, the 0.3 meter cable is supplied. If you need the 1.5 meter cable, you can order it from your Cisco supplier. For cable part numbers, see the “StackPower Connector” section on page 1-22. The “StackPower Cabling Configurations” section on page 2-9provides examples of recommended configurations.

•For rack-mounted switch stacks that are members of a data stack and a StackPower stack, see the “Switch Stacking and Power Stacking Guidelines” section on page 2-5.

StackPower Cabling Configurations

This section describes the recommended cabling configurations for a StackPower stack.

The cable in Figure 2-7connects a Catalyst 3850 switch to another Catalyst 3850 switch in a power stack or with an XPS. StackPower cables have color bands on the cable ends:

•The cable end with the green band can connect only to a Catalyst 3850 switch.

•The cable end with the yellow band can connect to a Catalyst 3850 switch or an XPS. The cable is available in two lengths.

Table 2-1 StackPower Cables

Part Number

 

Cable Type

 

Length

 

 

 

 

CAB-SPWR-30CM

StackPower cable

 

0.3 meter

 

 

 

 

CAB-SPWR-150CM

StackPower cable

 

1.5 meter

 

 

 

 

 

Figure 2-7

StackPower Cable for Use with Catalyst 3850 Switches

 

253393

Catalyst 3850 Switch Hardware Installation Guide

 

OL-26779-02

2-9

 

 

 

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Catalyst 3850 Switch Hardware Installation Guide Page N T E N T S Installing and Removing SFP and SFP+ Modules Grounding the Switch Power Supply Module Specifications A-2 Installing the Cisco Microsoft Windows USB Device Driver C-4 Viii Purpose PrefaceDocument Conventions Related Documentation Obtaining Documentation and Submitting a Service RequestProduct Overview Switch Models, Front Panel, Rear Panel, Management Options,Switch Model Cisco IOS Image Description Switch ModelsSwitch Model Cisco IOS Image Description Front Panel Catalyst 3850-48P-L Switch Front PanelPoE, PoE+, and Cisco Upoe Ports 10/100/1000 Ethernet PortsUSB Mini-Type B Port Management PortsNetwork Modules USB Type a PortNetwork Module Description SFP and SFP+ Modules3 4 5 LEDsColor XPS Status Color System StatusPort Mode Port LED Color Meaning Mode LED Port Mode DescriptionPort LEDs and Modes 10/100/1000/SFP ports Color USB Console LEDColor Description Actv LEDPoE LED Color Status of PoE mode PoE, PoE+, or Cisco UpoeColor Network Module Link Status Network Module LEDsRJ-45 Console Port LED Rear PanelRJ-45 Console Port Status StackWise Ports Power Supply ModulesNumber of Power Models Supplies Available PoE Models Default Power Supply Available PoEPoE Option Port Switch PoE Option Port Switch DC-Power Supply Module LEDs AC-Power Supply Module LEDsFan Modules Fan Module Description StackPower ConnectorEthernet Management Port Management OptionsRJ-45 Console Port Network Configurations Preparing for Installation Switch InstallationSafety Warnings OL-26779-02 Installation Guidelines Tools and Equipment Planning a Switch Data StackVerifying Switch Operation Powering Off the SwitchSwitch Stacking and Power Stacking Guidelines Data Stack Cabling Configurations344185 Data Stack Bandwidth and Partitioning ExamplesExample of a Data Stack with a Failover Condition Power-On Sequence for Switch Data StacksStackPower Stacking Guidelines Planning a StackPower StackPart Number Cable Type Length StackPower Cabling ConfigurationsStackPower Ring Topology StackPower Partitioning Examples Installing the SwitchRack-Mounting 11 Rack-Mounting Brackets Attaching the Rack-Mount Brackets12 Attaching Brackets for 19-inch Racks 13 Mounting the Switch in a Rack Mounting the Switch in a RackTable- or Shelf-Mounting After Installing the SwitchCisco logo Connector screw Connecting to the StackWise Ports16 Connecting the StackPower Cable to a StackPower Port Connecting to the StackPower Ports10/100/1000 Ethernet Port Connections Installing a Network Module in the SwitchInstalling and Removing SFP and SFP+ Modules Connecting Devices to the Ethernet PortsDevice Crossover Cable PoE+ and Cisco Upoe Port ConnectionsWhere to Go Next OL-26779-02 Overview Installing a Network ModuleCaptive screws Gigabit Ethernet ports Blank module Captive screws Color Link Status Network Module LEDsInstalling Network Modules Installing the Network Module in the Switch Interface Action Configuring a Network ModuleC3850-NM-4-1G module C3850-NM-4-10G moduleSupported GBICs C3850-NM-2-10G moduleTenGigabitEthernet GigabitEthenet Removing a Network Module Installing SFP and SFP+ ModulesSFP and SFP+ Modules Installing an SFP Module in the Network Module Removing SFP or SFP+ Modules Finding the Network Module Serial NumberNetwork Module Serial Number Location Power Supply Module Overview Power Supply InstallationPart Number Description AC OK LED AC Power Supply Module 6 5 AC Power Supply Module LEDs Installation GuidelinesDC Power Supply Module LEDs Installing or Replacing an AC Power Supply Inserting the AC-Power Supply in the Switch Installing a DC Power SupplyEquipment That You Need Grounding the SwitchStripping the Ground Wire 10 Attaching the Ground Lug and Wire Assembly Wiring the DC Input Power Source Installing the DC Power Supply in the Switch12 DC Source a Isolated From Source B with No Common Ground Finding the Power Supply Module Serial Number14 1100-W AC Power Supply Serial Number 16 440-W DC Power Supply Module Serial Number Installing the Fan Installing a Fan Module Fan Module InstallationFinding the Fan Module Serial Number Installing the Fan ModuleFan Module Serial Number Switch LEDs TroubleshootingDiagnosing Problems Switch Post ResultsLink Status Switch ConnectionsBad or Damaged Cable Ethernet and Fiber CablesPoE and PoE+ Port Connections 10/100/1000 Port ConnectionsSFP Modules Spanning Tree Loops Switch PerformanceInterface Settings Ping End DeviceAutonegotiation and Network Interface Cards Resetting the SwitchCabling Distance Replacing a Failed Data Stack Member Finding the Switch Serial NumberEnvironmental Ranges Technical SpecificationsSwitch Specifications Physical SpecificationsPower Specifications Power Supply Module SpecificationsPower Specifications Physical Specification Fan Module SpecificationsOperating Specification Connector Specifications Connector and Cable Specifications10/100/1000 Ports SFP and SFP+ Modules Gigabit Ethernet CX1 SFP+ Copper Connectors10/100/1000 Ethernet Management Port Figure B-4 Simplex LC Cable ConnectorFigure B-7 10/100 Port Pinouts Console PortSFP and SFP+ Module Cable Specifications Cable and Adapter SpecificationsStackWise Cables Two Twisted-Pair Cable Pinouts Four Twisted-Pair Cable PinoutsDevice Switch Console RJ-45-to-DB-9 Port DTEIdentifying a Crossover Cable Console Port Adapter PinoutsGND Switch Console RJ-45-to-DB-25 Port DTE OL-26779-02 Accessing the CLI Configuring the Switch with the CLI-Based Setup ProgramAccessing the CLI Through Express Setup USB Console Port Accessing the CLI Through a Console Port344194 Uninstalling the Cisco Microsoft Windows USB Driver Installing the Cisco Microsoft Windows USB Device DriverIP Settings Entering the Initial Configuration InformationConfiguring the Setup Program Enter an enable password, and press Return These choices appear OL-26779-02

C3850NM41G, C3850NM210G, WSC385024TS specifications

Cisco Systems is a global leader in networking and telecommunications hardware, and its Catalyst series of switches are widely recognized for their innovation, reliability, and performance. Among the numerous models available, the Cisco WSC385024TS, C3850NM41G, and C3850NM210G stand out for their advanced features and capabilities tailored to meet the needs of modern enterprises.

The Cisco WSC385024TS is a stackable switch that offers 24 ports, and it is built on Cisco's IOS XE software. It is designed for high-density environments, making it ideal for organizations that require robust connectivity and scalability. This model supports advanced Layer 2 and Layer 3 features and facilitates intelligent traffic management through Quality of Service (QoS). One of its standout features is the ability to stack up to nine switches together, enabling centralized management and increased fault tolerance. The WSC385024TS also integrates security features such as 802.1X authentication and access control lists, which are essential for maintaining a secure network infrastructure.

The C3850NM41G is a versatile switch that comes with 41 Gigabit Ethernet ports, making it suitable for environments that demand high-speed connectivity. This model supports Cisco's innovative StackWise-480 technology, which provides increased bandwidth and reliable inter-switch communication. Additionally, it features Power over Ethernet (PoE) capabilities, allowing it to deliver power to connected devices such as IP phones and wireless access points, thereby simplifying cabling and reducing the need for additional power sources. The C3850NM41G is also equipped with built-in automatic fault detection and recovery, enhancing the overall resilience of the network.

Lastly, the C3850NM210G model offers 210 Gbps of switching capacity, making it ideal for data-intensive applications. This switch combines performance with security, supporting various security protocols such as Virtual Routing and Forwarding (VRF) and Dynamic Host Configuration Protocol (DHCP) snooping to protect against malicious activity. With its modular design, the C3850NM210G allows for easy upgrades and expansions, facilitating adaptive network growth.

In summary, the Cisco WSC385024TS, C3850NM41G, and C3850NM210G switches provide advanced features, robust performance, and high scalability, making them ideal choices for businesses aiming to enhance their network infrastructure while supporting cutting-edge technologies. Whether for small businesses or large enterprises, these models exemplify Cisco's commitment to delivering high-quality networking solutions that adapt to the evolving demands of today's digital landscape.
Top Page Image Contents