Cisco Systems Catalyst 3550 warranty DHCP-enabled PC

Page 5

Step 7 Connect a straight-through Category 5 Ethernet cable (not provided) to any 10/100 or 10/100/1000 Ethernet port on the switch front panel and to the Ethernet port on the PC.

DHCP-enabled PC

Step 8 Verify that the LEDs on both Ethernet ports are green.

Step 9 Wait 30 seconds.

Step 10 Launch a web browser on your PC. Enter the IP address 10.0.0.1 in the web browser, and press Enter.

Step 11 The Express Setup page appears. If it does not appear, see the “In Case of Difficulty” section on page 20 for help.

5

Image 5

Contents Catalyst 3550 Multilayer Switch Getting Started Guide Taking Out What You Need Equipment That You Supply to Run Express SetupAbout this Guide Shipping Box Contents Running Express Setup DHCP-enabled PC Page Refreshing the PC IP Address Managing the SwitchUsing the Device Manager Other Management Options Command-Line InterfaceDownloading Cisco Network Assistant Before you Begin Rack-MountingEquipment That You Supply Installation Warning Statements Statement Attaching the Brackets Catalyst Rack-Mount the Switch Connect to 10/100 and 10/100/1000 Ports Connect to the Switch PortsConnect to 100BASE-FX Ports Ground the Switch Connecting to DC PowerWiring the DC Input Power Source Return Case of Difficulty Troubleshooting Express SetupAccessing Help Online Resetting the SwitchFor More Information Cisco.com Obtaining DocumentationOrdering Documentation Documentation FeedbackCisco Technical Support Website Obtaining Technical AssistanceDefinitions of Service Request Severity Submitting a Service RequestObtaining Additional Publications and Information Cisco Limited Lifetime Hardware Warranty Terms Duration of Hardware Warranty Page Page Page USA