Cisco Systems WSC3560CG8PCSRF manual Mounting template Desk or shelf Screws

Catalyst 3560-C and 2960-C Switch Getting Started Guide

Note For instructions on mounting the switch under a desk or on a wall, see the hardware installation guide on Cisco.com.

To secure the switch on top of or under a desk or a shelf, use the mounting template and three mounting screws.

1.Position the mounting template on the mounting surface with the two side-by-side slots forward. Peel the adhesive strip off the bottom, and attach the template.

2.Use a 0.144-inch (3.7 mm) or a #27 drill bit to drill a 1/2-inch (12.7 mm) hole in the three template screw slot positions.

3.Insert the screws in the slots on the template, and tighten until they touch the template. Remove the template from the mounting surface.

Note Use the supplied number 8 Phillips pan-head screws, or use larger pan-head screws to securely mount the switch.

2

3

1

210096

1

2

Mounting template 3 Desk or shelf

Screws

	Catalyst 3560-C and 2960-C Switch Getting Started Guide
OL-23802-02		15