Cisco Systems 6500 manual Show ssl-proxy status fdu ssl tcp

Chapter 2 Commands for the Catalyst 6500 Series SSL Services Module

show ssl-proxy status

show ssl-proxy status

To display information about the SSL Services Module proxy status, use the show ssl-proxy status command.

show ssl-proxy status [fdu ssl tcp]

Syntax Description	fdu	(Optional) Displays the FDU status.
	ssl	(Optional) Displays the SSL status.
	tcp	(Optional) Displays the TCP status.

Defaults

Command Modes

Command History

This command has no default settings.

EXEC

Release	Modification
Cisco IOS Release	Support for this command was introduced on the Catalyst 6500 series
12.1(13)E and	switches.
SSL Services Module
Release 1.1(1)
SSL Services Module	The output of the show ssl-proxy status command was changed to
Release 1.2(1)	include statistics that are displayed at a 5-second, 1-minute, and
	5-minute traffic rate for CPU utilization.
SSL Services Module	This command was changed to add the following keywords:
Release 3.1(1)	•	fdu
	•	ssl
	•	tcp

Examples	This example shows how to display the status of the SSL Services Module:
	ssl-proxy#			show ssl-proxy status
	FDU	cpu	is	alive!
	FDU	cpu	utilization:

% process util	: 0		% interrupt	util :	0
proc cycles : 0x2DB3980C			int cycles	: 0x2ADACD71
total cycles: 0x4E75127FCEA4
% process util (5 sec)		: 0	% interrupt util (5 sec) : 0
% process util (1 min)		: 0	% interrupt		util (1 min): 0
% process util (5 min)		: 0	% interrupt		util (5 min) : 0

Catalyst 6500 Series Switch SSL Services Module Command Reference

2-82 OL-9105-01