Cisco Systems Topspin 360 manual Lift the Chassis onto the Shelf, Secure the Chassis

Page 10

8

Lift the Chassis onto the Shelf

8.Place the switch in the rack.

a.Lift the switch (using at least two people). Face the side of the chassis without handles toward the rack.

b.Rest the end of the chassis at the edge of the shelf. Push the chassis back into the rack until the handles meet the rack posts. Make sure that the left and right sides of the chassis are pushed back evenly.

NOTE: There are no side rails for the current Topspin 360 chassis.

Secure the Chassis

9.Attach the chassis handles to the rack posts, using screws that fit your rack.

10.Tighten any screws that you left loose for adjustment.

Page 9 Page 10
Image 10
Page 9 Page 10
Contents Topspin Page Topspin Shelf and Rack Ear Kit Contents Page Requirements Install the Rack Ears Install the Shelf Kit3Align Bracket with Rear Post 5Align Shelf with Installed Brackets 7Screw the Bracket Into the Shelf From Inside the Rack Lift the Chassis onto the Shelf Secure the Chassis
Top Page Image Contents