Cisco Systems Topspin 360 manual Install the Rack Ears, Install the Shelf Kit

Page 6

4

Install the Rack Ears

1.Determine the end of the Server Switch to position at the front of the rack.

2.Install the rack ears using the screws provided.

Figure 2-1:Install the Rack Ears on the Chassis

Install the Shelf Kit

1.Separate the sliding piece from the main shelf unit.

Note the way that the pieces fit together. The flanges face outward.

The right bracket is engraved with an EXR, and the left bracket is engraved with an EXL.

Figure 2-2:Separate the Sliding Bracket From Both Sides of the Shelf Unit

2.Attach the wide bracket pieces to the rear rack posts (opposite from the side with which you want to align the switch).

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Topspin Page Topspin Shelf and Rack Ear Kit Contents Page Requirements Install the Rack Ears Install the Shelf Kit3Align Bracket with Rear Post 5Align Shelf with Installed Brackets 7Screw the Bracket Into the Shelf From Inside the Rack Lift the Chassis onto the Shelf Secure the Chassis
Top Page Image Contents