Cisco Systems Topspin 360 manual 5Align Shelf with Installed Brackets

Page 8

3.Align the back end of the shelf with the exposed ends of the mounted brackets in the rack. The back of the shelf unit is the straight end (opposite the end with flanges). There are channels inside the shelf into which the brackets slide.

Figure 2-5:Align Shelf with Installed Brackets

4.Push the shelf into the rack until the front flanges of the shelf meets the rack posts.

Figure 2-6:Push Shelf Unit into Rack

Image 8

Contents Topspin Page Topspin Shelf and Rack Ear Kit Contents Page Requirements Install the Rack Ears Install the Shelf Kit3Align Bracket with Rear Post 5Align Shelf with Installed Brackets 7Screw the Bracket Into the Shelf From Inside the Rack Lift the Chassis onto the Shelf Secure the Chassis