Cisco Systems SRW248G4P manual Management Settings, User & Password Settings

Page 13

Chapter 4

Configuration Using the Console Interface

Versions

The Versions screen displays the Boot Version, Software Version, Loader Version and the Hardware Version..

Versions

Boot Version  This file runs when the Switch is turned on.. It performs power-on diagnostics and loads the operating system for the Switch..

Software Version  This file contains the programming code that runs the Switch..

Loader Version  This file loads the software from storage memory to main memory..

Hardware Version  The current hardware setup of the Switch..

General Information

The General Information screen displays the System Description, System Up Time, System Mac Address, System Contact, System Name and System Location..

General Information

Management Settings

The Management Settings screen displays the Serial Port Configuration..

Management Settings

Serial Port Configuration

The Serial Port Configuration screen displays the current setting for the baud rate.. The baud rate can be changed by selecting Edit then using the spacebar to toggle through the different baud rates.. Use the Save action to set the new baud rate..

Serial Port Configuration

User & Password Settings

The User & Password Settings screen displays user account information on the Switch.. The default account is the admin account.. To add a new user, use the arrow keys to select Edit and then press the Enter key, then enter the user name of the new account and assign a password to the account.. The password must be re-entered into the Again Password column to confirm the password..

User & Password Settings

48-Port 10/100 + 4-Port Gigabit Switch with WebView and Power over Ethernet



Page 12 Page 14
Image 13
Page 12 Page 14
Contents User Guide Table of Contents ACL Appendix a About Gigabit Ethernet and Fiber Optic Cabling Appendix E Contact InformationIcon Descriptions About This GuideOnline Resources Copyright and TrademarksChapter Introduction ChapterFront Panel Chapter Product OverviewSide Panel Back PanelPlacement Options Pre-Installation ConsiderationsOverview Uplinking the Switch Hardware InstallationDesktop Placement Rack-Mount PlacementConfiguring the HyperTerminal Application Chapter Configuration Using Console InterfaceSwitch Main Menu LoginSystem Configuration Menu System ConfigurationUser & Password Settings Management SettingsIP Address Settings IP ConfigurationReboot System Restore System Default SettingsFile Management PoE Configuration Port ConfigurationPort Status Back to Main MenuPort PoE Configuration System PoE ConfigurationPort PoE Status LogoutSetup Summary SetupDevice Information System Information Setup Network SettingsPoE Information IdentificationSet Time Setup TimeEdit Port Settings Port Management Port SettingsPort Management Port Broadcast Control Port Management Link AggregationGlobal Setting Port Management PoE Power SettingsPort Setting Port Management LacpVlan Management Vlan Management Port SettingsVlan Management Create Vlan Create VlanVlan Management Vlan to Ports Vlan Management Ports to VlanStatistics Rmon Statistics StatisticsStatistics Rmon History Statistics Rmon Events Statistics Rmon AlarmsStatistics 802.1x Statistics Statistics Port UtilizationACL MAC based ACL ACL IP based ACLRadius Server Setting Security Authentication ServersSecurity Security ACL BindingTacacs Server Setting Security 802.1x SettingsSecurity Ports Security Security Management ACL Security Https SettingsSecurity SSH Host-Key Settings Security SSH SettingsQoS QoS CoS SettingsCoS to Queue QoS Dscp Settings QoS Queue SettingsQueue Settings Port to CoSClass Map QoS DiffServ SettingsPolicy Map QoS DiffServ Port Binding Spanning TreeQoS Bandwidth Spanning Tree Global STP Spanning Tree STP StatusSpanning Tree STP Port Settings Spanning Tree STP Port Settings STP Port Setting Detail Spanning Tree Rstp Port Settings Spanning Tree Mstp Properties Spanning Tree Mstp Instance SettingsSpanning Tree Mstp Interface Settings Multicast Multicast Static Member Ports Multicast Global SettingsMulticast Member Ports Query Multicast Static Router PortsMulticast Router Ports Query Snmp Global Parameters Snmp Group Profile Snmp ViewsSnmp Group Membership User AuthenticationSnmp Communities Data PrivacyAdmin User Authentication AdminSnmp Notification Recipient SNMPv1,2Static Address Setting Admin Forwarding DatabaseAddress Aging Dynamic Address QuerySystem Logging Admin LogSyslog Smtp Setting Admin Port MirroringAdmin Ping Admin Cable TestAdmin Save Configuration Admin Firmware Upgrade Admin Jumbo FrameAdmin Http Upgrade Admin Factory Default Admin RebootGigabit Ethernet Appendix a About Gigabit Ethernet Fiber Optic CablingFiber Optic Cabling Appendix B Glossary Appendix BGlossary Smtp Simple Mail Transfer Protocol The standard e Appendix B Appendix C Appendix C SpecificationsSpecifications Limited Warranty Appendix D Warranty and Regulatory InformationFCC Statement Safety NoticesIndustry Canada Canada IC StatementDansk Danish Miljøinformation for kunder i EU La Directiva 2002/96/CE de la UE exige que los equipos que Norsk Norwegian Miljøinformasjon for kunder i EU WEB For additional information, please visit Appendix E

SRW248G4P specifications

Cisco Systems SRW248G4P is a high-performance Layer 2 switch designed specifically for small to medium-sized businesses that require robust networking solutions. This switch supports Power over Ethernet (PoE), providing a highly flexible option for powering devices such as IP phones, wireless access points, and surveillance cameras.

One of the standout features of the SRW248G4P is its 48 10/100 Ethernet ports, which ensure ample connectivity for various networked devices. Additionally, it offers four Gigabit Ethernet uplink ports, allowing for seamless integration with existing network infrastructure and facilitating high-speed data transfer. The combination of these ports enables businesses to expand their network capabilities as needed without the immediate requirement for added devices.

The SRW248G4P comes equipped with advanced Layer 2 switching capabilities, including VLAN support, which enables the segmentation of network traffic for improved performance and security. It also supports Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP), which help prevent network loops and ensure redundancy. With features like Link Aggregation Control Protocol (LACP), multiple physical connections can be combined into a single logical link, enhancing bandwidth and providing failover capabilities.

Another critical attribute of the Cisco SRW248G4P is its user-friendly management interface. The switch can be managed through a web-based interface, allowing IT administrators to configure settings, monitor performance, and troubleshoot issues with ease. Additionally, it supports SNMP (Simple Network Management Protocol) for integration with network management systems, further simplifying monitoring tasks.

Power over Ethernet functionality is a significant advantage of the SRW248G4P, providing up to 15.4 watts per port. This capability simplifies installation and reduces the clutter of power cords and outlets. Organizations can deploy PoE-enabled devices in locations that lack power sources, thus enhancing overall flexibility in network design.

In summary, the Cisco Systems SRW248G4P is a feature-rich switch tailored for small to medium-sized enterprises. Its blend of performance, management capabilities, and advanced features like PoE makes it a valuable asset in any organization's networking setup. By ensuring reliable connectivity and ease of management, businesses can focus more on growth and their core objectives rather than worrying about network complexities.
Top Page Image Contents