Chapter 4 Storage/Control I/O Module
Description
Table
Pin | Signal | Signal Name |
|
|
|
2 | C+ | Collision + (Input) |
|
|
|
3 | T+ | Transmit + (Output) |
|
|
|
5 | R+ | Receive + (Input) |
|
|
|
6 | GND | Ground |
|
|
|
9 | C– | Collision – (Input) |
|
|
|
10 | T– | Transmit – (Output) |
|
|
|
12 | R– | Receive – (Input) |
|
|
|
To implement Ethernet links, you must purchase the optional Ethernet Communications Package available from Cisco Systems. This package contains supporting software and the Cisco VCO/4K Ethernet Guide which covers the cabling requirements and implementation strategies. You must provide cables, transceivers and other components to establish Ethernet links.
Printer Interface
The printer interface on the Storage/Control I/O Module front panel supports parallel system printers through a
Note The End of Line (EOL) terminator for the system printer must be defined in the system database via the Peripheral Configuration screen prior to use (refer to the Cisco VCO/4K System Administrator’s Guide for more information).
Figure 4-7 I/O Module to System Printer—Cable Wiring Diagram
Printer | Parallel Printer |
Male
Pin 1
Pin 13
Pin 16
Pin 19
GND
Male
Pin 1
Pin 13
Pin 16
Pin 19
Pin 32
Pin 32
50171
Cisco VCO/4K Mechanical Assemblies
| ||
|