Cisco Systems VCO/4K specifications Troubleshooting, Replacement Procedures, LEDs Not Illuminated

Page 16

Chapter 4 Storage/Control I/O Module

Troubleshooting

Replacement Procedures

Caution Follow ESD rules when removing a system component. Use a wrist strap for grounding.

To replace the Storage/Control I/O Module:

Step 1 Place the replacement Storage/Control I/O Module on the antistatic mat or envelope.

Step 2 Verify that the Combined Controller that is to be connected to the Storage/Control I/O Module is not plugged into the backplane.

Step 3 Verify that all the jumpers on the replacement card correspond with those on the removed Storage/Control I/O Module.

Verify that the jumper configuration is appropriate for the system configuration.

Refer to the “Serial Ports 1 Through 4 and Jumper Settings” section on page 4-11for details on jumper settings for the Storage/Control I/O Module.

Step 4 Grasp the replacement card by the sides of the front panel and align it with the top and bottom card guides.

Step 5 Push the card inward until it makes contact with the midplane.

Step 6 Firmly push the card toward the midplane. The card fits tightly into the midplane connectors and some force is required to seat the card back firmly into the midplane connectors.

Step 7 Use a 1/8-inch bladed screwdriver to tighten the mounting screws at the top and bottom of each card into the tapped holes on the mounting rail.

Step 8 Plug the Combined Controller into the backplane.

Step 9 If installing in a nonredundant system, make sure the system is powered on.

Step 10 If the hard disk drive does not contain the Generic software, install the software. Refer to the system release notes for instructions on installing the Generic software, backing up and restoring the database, and licensing.

Troubleshooting

Note More extensive troubleshooting information is contained in the Cisco VCO/4K

Troubleshooting Guide.

LEDs Not Illuminated

If either of the LEDs on the Storage/Control I/O Module is not illuminated, corrective action should be taken. These LEDs are fused powered sources. The fuses are on the Combined Controller and are not field replaceable. Call Cisco Systems for technical support.

Cisco VCO/4K Mechanical Assemblies

4-16

78-10334-03

 

 

Image 16
Contents Specifications Storage/Control I/O ModuleFront Panel Indicators and Ports Assignments DescriptionStorage/Control I/O Module Front Panel Hard Disk Drive Hard disk drive Midplane Connectors Hard disk drive LEDsPin Signal Name Description/Direction Serial Ports 1GND Serial Ports 3 Ethernet InterfacePin Signal Signal Name Printer InterfaceHardware Configuration Scsi Termination ConfigurationSerial Port Configuration Serial Ports 1 Through 4 and Jumper SettingsSerial Ports 1 Through Port DTE Operation DCE OperationRemoval and Replacement Information Jumper Configuration for DCE/DTE, Serial Ports11 Storage/Control I/O Module Location Removal Procedures Replacement Procedures TroubleshootingLEDs Not Illuminated Troubleshooting Reference Materials

VCO/4K specifications

Cisco Systems VCO/4K is a powerful video conferencing solution that has emerged as a leader in enabling high-quality, collaboration-driven communication within enterprises. Designed to cater to the demands of modern workplaces, the VCO/4K embodies a robust suite of features and advanced technologies that elevate the video conferencing experience.

One of the standout characteristics of the Cisco VCO/4K is its ability to deliver stunning 4K video quality. The high resolution ensures that participants can engage with crystal-clear visuals, making remote meetings feel more immersive and lifelike. This quality is essential for maintaining engagement and fostering an effective collaborative environment.

The VCO/4K incorporates Cisco’s advanced video technology, including the use of intelligent screen layouts that dynamically adapt during calls. This ensures that the main speaker is always prominently displayed, while other participants are shown in secondary views. This feature enhances the overall experience by keeping attention focused where it’s most needed, improving interaction and communication.

Another key technology that powers the Cisco VCO/4K is its cutting-edge audio capabilities. The system features high-fidelity microphones and speakers that deliver superior sound quality. Cisco's advancements in echo cancellation and noise reduction create a clearer auditory experience, ensuring that every participant can be heard without distractions. This is crucial for effective dialogue, especially in larger meetings where background noise can otherwise hinder conversation flow.

Integration with Cisco WebEx and other collaboration tools enhances the utility of the VCO/4K. Users can easily share screens, present documents, and collaborate in real-time, making it a versatile tool for a range of business applications. The ability to seamlessly connect with other platforms means that teams can work efficiently without the need for complex setups.

Security is another cornerstone of the Cisco VCO/4K's design. Built-in encryption protocols protect sensitive information shared during calls, ensuring that enterprises can communicate freely without compromising data integrity.

Overall, Cisco Systems VCO/4K stands out as a comprehensive video conferencing solution that combines impressive visual and audio capabilities, intelligent technology integration, and security features to create a cutting-edge conferencing experience. For businesses seeking to enhance their collaborative efforts, the VCO/4K offers a reliable platform that meets the demands of today’s dynamic work environment.