Cisco Systems SR2024 manual Chapter Product Overview, Front Panel

Chapter 2: Product Overview

Chapter 2:

Product Overview

Front Panel

The LEDs and ports are located on the front panel of the Switch.

SR2024 24-Port 10/100/1000 Gigabit Switch

Link/Act

Gigabit (Shared with 12) (Shared with 24)

Link/Act

SYSTEM

Gigabit

miniGBIC1miniGBIC2

Front Panel

LEDs

System  (Green)  The System LED will light up when the Switch is powered on.

Link/Act  (Green) Each LED will light up when there is a connection made through its corresponding port. It will flash when there is activity on its corresponding port.

Gigabit  (Amber) Each LED will light up when there is a Gigabit connection made through its corresponding port. It will flash when there is activity on its corresponding port.

Ports

1-24 The Switch is equipped with 24 auto-sensing RJ‑45 ports. These RJ-45 ports support network speeds of either 10Mbps, 100Mbps, or 1000Mbps and can operate in half and full-duplex modes. Auto-sensing technology enables each port to automatically detect the speed of the device connected to it and adjust its speed and duplex accordingly.

To connect a device to a port, you will need to use a network cable. You will need to use Category 5 (or better) cables.

24-Port 10/100/100 Gigabit Switch