Implementing NTP on Cisco IOS XR Software
How to Implement NTP on Cisco IOS XR Software
Verifying the Status of the External Reference Clock
This task explains how to verify the status of NTP components.
Note The commands can be entered in any order.
SUMMARY STEPS
1.show ntp associations [detail] [location
2.show ntp status [location
DETAILED STEPS
| Command or Action | Purpose |
Step 1 |
|
|
show ntp associations [detail] [location | Displays the status of NTP associations. | |
|
| |
| Example: |
|
| RP/0/RP0/CPU0:router# show ntp associations |
|
Step 2 |
|
|
show ntp status [location | Displays the status of NTP. | |
| Example: |
|
| RP/0/RP0/CPU0:router# show ntp status |
|
|
|
|
Examples
The following is sample output from the show ntp associations command:
RP/0/0/CPU0:router# show ntp associations
address | ref clock | st | when | poll reach | delay | offset | disp | |
+~127.127.1.1 | 127.127.1.1 | 5 | 5 | 1024 | 37 | 0.0 | 0.00 | 438.3 |
*~172.19.69.1 | 172.24.114.33 | 3 | 13 | 1024 | 1 | 2.0 | 67.16 | 0.0 |
* master (synced), # master (unsynced), + selected, | - candidate, | ~ configured | ||||||
The following is sample output from the show ntp status command:
RP/0/0/CPU0:router# show ntp status
Clock is synchronized, stratum 4, reference is 172.19.69.1
nominal freq is 1000.0000 Hz, actual freq is 999.9988 Hz, precision is 2**26 reference time is C54C131B.9EECF6CA (07:26:19.620 UTC Mon Nov 22 2004) clock offset is 66.3685 msec, root delay is 7.80 msec
root dispersion is 950.04 msec, peer dispersion is 3.38 msec
Cisco IOS XR System Management Configuration Guide