Cisco Systems 3000 Series manual Using the Onboard Administrator CLI Other Management Options

Step 3 Configure the PC terminal emulation software for:

–9600 baud

–8 data bits

–No parity

–1 stop bit

–No flow control

Step 4 Use the CLI to enter commands to configure the switch module. See the software configuration guide and the command reference for more information.

Using the Onboard Administrator CLI

See the HP BladeSystem enclosure setup and installation guide at http://www.hp.com/go/bladesystem/documentation for information on how to use the Onboard Administration CLI.

Other Management Options

You can use SNMP management applications such as CiscoWorks Small Network Management Solution (SNMS) to configure and manage the switch module. You also can manage it from an SNMP-compatible workstation that is running platforms such as HP OpenView or SunNet Manager.

The Cisco IE2100 Series Configuration Registrar is a network management device that works with embedded Cisco Networking Services (CNS) agents in the switch module software. You can use IE2100 to automate initial configurations and configuration updates on the switch module.

See the “Accessing Help Online” section on page 28 for a list of supporting documentation.

22