Philips SHB5800 user manual Pair the headset with your mobile phone, Manual pairing, NFC pairing

Page 7
Activate the Bluetooth feature of your mobile phone, select Philips SHB5800.
Enter the headset password "0000" (4 zeros) if prompted. For those mobile phones featuring Bluetooth 2.1+EDR or higher, no need to enter a password.

4Pair the headset with your mobile phone

Before you use the headset with your mobile phone for the first time, pair it with a mobile phone. A successful pairing establishes a unique encrypted link between the headset and mobile phone.The headset stores the last 4 devices

in the memory. If you try to pair more than 4 devices, the earliest paired device is replaced by the new one.

There are two ways to pair your headset with your mobile phone:

Manual pairing

NFC pairing

Manual pairing

1 Make sure that the headset is fully charged and turned off.

2 Press and hold the on/off button until the blue and white LED flashes alternately.

»»The headset remains in pairing mode for 5 minutes.

3 Make sure that the mobile phone is turned on and its Bluetooth feature is activated.

4 Pair the headset with the mobile phone. For detailed information, refer to the user manual of your mobile phone.

NFC pairing

1 Make sure you turn on the NFC function on your phone and your phone’s screen remains active.

2 Place your phone over the NFC detection area (see 'Overview of your wireless headset' on page 3).

3 Follow the pairing instructions of your phone. Enter the password "0000" (4 zeros) if prompted.

Note

•• Make sure your mobile phone has the NFC feature available and switched on.

•• Make sure your mobile phone is not in standby mode.

•• Pairing with NFC is only suitable for Android mobile operating system 4.2 or above.

•• Refer to the user manual of your mobile phone to identify its NFC detection area.

The following example shows you how to pair the headset with your mobile phone.

1

2

 

 

 

 

 

10:35

 

 

 

 

 

 

10:36

 

 

 

 

 

10:37

Settings

Connectivity

Settings

 

Settings

Connectivity

Bluetooth

 

 

Devices Found

 

 

 

 

 

 

 

 

Add

 

 

Philips SHB5800

 

Enter Password

 

 

 

 

 

 

 

 

****

 

Bluetooth

 

 

 

 

 

 

 

 

 

 

 

 

device

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select

Back

Select

Back

Select

Back

EN 5

Image 7
Contents Register your product and get support at Always there to help youPage Contents Compliance with EMF Important safety instructions Hearing Safety General informationWhats in the box Overview of your wireless Headset Your wireless in-ear headsetOther devices Get started Turns off when the headset is fully chargedCharge your headset Pair the headset with your mobile phone Manual pairingNFC pairing »» The headset remains in pairing mode for 5 minutesManage your calls and music Connect the headset to a Bluetooth deviceTechnical data Declaration of conformity Disposal of your old product and batteryEnvironmental information Trademarks BluetoothMobile phone cannot find the headset Cannot pair my Bluetooth headset with a mobile phoneBluetooth device, or remove obstacles between them Are the Bluetooth headsets sweat/water proof?Page UMSHB580000ENV2.0 wk1436