Cisco Systems OL-9971-01 manual Adding a Remote Agent

Page 20

Chapter 3 Network Configuration

Configuring Remote Agents (ACS Solution Engine Only)

Note If the port number that you provide does not match the port the remote agent that you configured for listening, ACS cannot communicate with the remote agent. For information about configuring the remote agent port, see the Installation and Configuration Guide for Cisco Secure ACS Remote Agents Release 4.1.

•Network Device Group—The name of the NDG to which this remote agent should belong. To make the remote agent independent of NDGs, chose the Not Assigned selection.

In addition to the options in the preceding list, the Remote Agent Setup page includes the following options:

•Running Status—Information about the status of the remote agent. If ACS can contact the remote agent, the uptime for the remote agent appears. If ACS cannot contact the remote agent, the message

Not responding appears.

•Configuration Provider—The ACS from which the remote agent receives its configuration.

Tip Click on the ACS name to access the web interface for the ACS that provides configuration data to a remote agent. A new browser window displays the web interface for the ACS that provides configuration data to the remote agent.

•Service Table—ACS displays a table of remote agent services below the Configuration Provider. The table includes the following columns:

–Service—A list of services that a remote agent can provide: remote logging and Windows authentication.

–Available—Whether the remote agent can currently provide the corresponding service.

–Used by this ACS—Whether the ACS into which you are logged is currently using the corresponding service.

Adding a Remote Agent

Before You Begin

For descriptions of the options available while adding a remote agent configuration, see Remote Agent Configuration Options, page 3-19.

For ACS to communicate with a remote agent, you must ensure that gateway devices between a remote agent and ACS permit communication over the TCP ports used by remote agents. For information about ports used by remote agents, see the Installation and Configuration Guide for Cisco Secure ACS Remote Agents Release 4.1.

To add and configure a remote agent:

Step 1 In the navigation bar, click Network Configuration.

The Network Configuration section opens.

Step 2 Perform one of the following steps, based on your use of NDGs:

a.If you are using NDGs, click the name of the NDG to which you want to assign the remote agent. Then, in the NDG Remote Agents table, click Add Entry.

b.If you are not using NDGs, click Add Entry in the Remote Agents table.

User Guide for Cisco Secure Access Control Server

3-20

OL-9971-01

 

 

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Network Configuration About Network ConfigurationAbout ACS in Distributed Systems AAA Servers in Distributed SystemsProxy in Distributed Systems Default Distributed System SettingsProxy Feature Fallback on Failed Connection An ExampleRemote Use of Accounting Packets Character StringNetwork Device Search Criteria Other Features Enabled by System DistributionNetwork Device Searches Searching for Network Devices Configuring AAA Clients AAA Client Configuration OptionsNetwork Configuration Configuring AAA Clients Network Configuration Configuring AAA Clients Adding AAA Clients Before You BeginEditing AAA Clients Configuring a Default AAA Client Follow the steps for Adding AAA Clients,Configuring AAA Servers Deleting AAA ClientsAAA Server Configuration Options Adding AAA Servers Editing AAA Servers Configuring Remote Agents ACS Solution Engine Only Deleting AAA ServersRemote Agent Configuration Options About Remote AgentsAdding a Remote Agent Editing a Remote Agent Configuration Deleting a Remote Agent Configuration Configuring Network Device Groups Adding a Network Device Group Assigning an Unassigned AAA Client or AAA Server to an NDG Reassigning AAA Clients or AAA Servers to an NDGEditing a Network Device Group NDG properties are changedConfiguring Proxy Distribution Tables Deleting a Network Device GroupAbout the Proxy Distribution Table Adding a New Proxy Distribution Table EntryNetwork Configuration Configuring Proxy Distribution Tables Editing a Proxy Distribution Table Entry Deleting a Proxy Distribution Table Entry
Top Page Image Contents