Cisco Systems OL-9971-01 manual Editing AAA Servers

Page 17

Chapter 3 Network Configuration

Configuring AAA Servers

Step 2 Do one of the following:

•If you are using NDGs, click the name of the NDG to which the AAA server is to be assigned. Then, click Add Entry below the [name] AAA Servers table.

•To add AAA servers when you have not enabled NDGs, below the AAA Servers table, click Add Entry.

The Add AAA Server page appears.

Step 3 Enter the AAA server settings, as needed. For information about the configuration options available for the AAA server, see AAA Server Configuration Options, page 3-15.

Step 4 To save your changes and apply them immediately, click Submit + Apply.

Tip To save your changes and apply them later, choose Submit. When you are ready to implement the changes, choose System Configuration > Service Control. Then, choose Restart.

Note Restarting the service clears the Logged-in User report and temporarily interrupts all ACS services. This action affects the Max Sessions counter and resets it to (0).

Editing AAA Servers

Use this procedure to edit the settings for AAA servers that you have previously configured.

Note You cannot edit the names of AAA servers. To rename AAA servers, you must delete the existing AAA server entry and then add a new server entry with the new name.

Before You Begin

For descriptions of the options available while editing a remote AAA server entry, see AAA Server Configuration Options, page 3-15.

For ACS to provide AAA services to a remote AAA server, you must ensure that gateway devices between the remote AAA server and ACS permit communication over the ports that support the applicable AAA protocol (RADIUS or TACACS+). For information about ports that AAA protocols use, see AAA Protocols—TACACS+ and RADIUS, page 1-3 .

To edit AAA servers:

Step 1 In the navigation bar, click Network Configuration.

The Network Configuration page opens.

Step 2 Do one of the following:

•If you are using NDGs, click the name of the NDG to which the AAA server is assigned. Then, in the AAA Servers table, click the name of the AAA server to be edited.

•If you have not enabled NDGs, in the AAA Servers table, click the name of the AAA server to be edited.

The AAA Server Setup for X page appears.

User Guide for Cisco Secure Access Control Server

 

OL-9971-01

3-17

 

 

 

Page 16 Page 18
Image 17
Page 16 Page 18
Contents About Network Configuration Network ConfigurationAAA Servers in Distributed Systems About ACS in Distributed SystemsProxy in Distributed Systems Default Distributed System SettingsProxy Feature An Example Fallback on Failed ConnectionCharacter String Remote Use of Accounting PacketsNetwork Device Search Criteria Other Features Enabled by System DistributionNetwork Device Searches Searching for Network Devices AAA Client Configuration Options Configuring AAA ClientsNetwork Configuration Configuring AAA Clients Network Configuration Configuring AAA Clients Before You Begin Adding AAA ClientsEditing AAA Clients Follow the steps for Adding AAA Clients, Configuring a Default AAA ClientDeleting AAA Clients Configuring AAA ServersAAA Server Configuration Options Adding AAA Servers Editing AAA Servers Deleting AAA Servers Configuring Remote Agents ACS Solution Engine OnlyAbout Remote Agents Remote Agent Configuration OptionsAdding a Remote Agent Editing a Remote Agent Configuration Deleting a Remote Agent Configuration Configuring Network Device Groups Adding a Network Device Group Reassigning AAA Clients or AAA Servers to an NDG Assigning an Unassigned AAA Client or AAA Server to an NDGNDG properties are changed Editing a Network Device GroupDeleting a Network Device Group Configuring Proxy Distribution TablesAdding a New Proxy Distribution Table Entry About the Proxy Distribution TableNetwork Configuration Configuring Proxy Distribution Tables Deleting a Proxy Distribution Table Entry Editing a Proxy Distribution Table Entry
Top Page Image Contents