Chapter 3 Network Configuration
Configuring Network Device Groups
Note You must enable the Key Wrap feature in the NAP Authentication Settings page to implement these shared keys in
Step 6 Click Submit.
The Network Device Groups table displays the new NDG.
Step 7 To populate the newly established NDG with AAA clients or AAA servers, perform one or more of the following procedures, as applicable:
•Adding AAA Clients, page
•Adding AAA Servers, page
•Assigning an Unassigned AAA Client or AAA Server to an NDG, page
•Reassigning AAA Clients or AAA Servers to an NDG, page
Assigning an Unassigned AAA Client or AAA Server to an NDG
You use this procedure to assign an unassigned AAA client or AAA server to an NDG. Before you begin this procedure, you should have already configured the client or server and it should appear in the Not Assigned AAA Clients or Not Assigned AAA Servers table.
To assign a network device to an NDG:
Step 1 In the navigation bar, click Network Configuration.
The Network Configuration page opens.
Step 2 In the Network Device Groups table, click Not Assigned.
Tip If the Network Device Groups table does not appear, choose Interface Configuration > Advanced Options. Then, check the Network Device Groups check box.
Step 3 Click the name of the network device that you want to assign to an NDG.
Step 4 From the Network Device Groups list, select the NDG to which you want to assign the AAA client or AAA server.
Step 5 Click Submit.
The client or server is assigned to an NDG.
Reassigning AAA Clients or AAA Servers to an NDG
To reassign AAA clients or AAA servers to a new NDG:
Step 1 In the navigation bar, click Network Configuration.
The Network Configuration page opens.
User Guide for Cisco Secure Access Control Server
|
| ||
|
|