Configuring the NSS | 3 | |
| ||
Logging into the Configuration Interface |
| |
|
|
|
|
|
|
|
|
|
NOTE The configuration for your computer is only temporary. After you initially open the configuration interface, you can configure the static IP address for the NSS and then restore your computer’s network settings to their previous values. For help setting the IP configuration on the NSS, refer to the online help available from NSS configuration interface.:
Logging into the Configuration Interface
This section describes how to log in to the NSS configuration interface. The NSS configuration interface is a management tool you use to configure the NSS.
If you are logging into the NSS for the first time, write down the MAC address located on the sticker attached to the bottom of the chassis. You will need the MAC address as this is part of the default hostname. Otherwise, skip this step
STEP 1 Select a login method. There are three ways to log into the configuration interface.
1.Open a web browser on your computer and enter the following URL in the Address field:
-http://<IP_address_of_NSS_unit>
Where <IP_address_of_NSS_unit >is the IP address of the NSS3000 NAS chassis, which appears on the LCD display.
You can also access the chassis by entering the following:
-http://NAS<MAC_address_of_NSS_unit>
Where <MAC_address_of_NSS_unit > is the MAC address of the NSS3000 NAS chassis. The MAC address of the chassis is recorded on a label above the disk drive b
2.Use the Bonjour discovery tool (if installed) and select the NSS from the list of available devices.
NSS3000 Series Network Storage System Getting Started Guide | 13 |