Cisco Systems NSS3000 Series manual 188910

Page 9

STEP 9

Setting up the Hardware	2
Setting up the Hardware
Installing the Disk Drives

188910

Repeat steps 5 through 9 to install additional disk drives.

STEP 10 Close the front door of the chassis.

STEP 11 Continue to the next section, Connecting the NSS to the Network.

NSS3000 Series Network Storage System Getting Started Guide

5

Image 9

Contents Getting Started Guide Cisco Systems, Inc. All rights reserved OL-18629-01 Setting up the Hardware Contents IntroductionConfiguring the NSS Accessing the Network StorageAppendix B Specifications Appendix C Additional Information ContentsChapter a NSS LEDs Appendix D Support ContactsBenefits IntroductionApproved Vendor List for Drives About this GuideInstalling the Disk Drives Setting up the HardwareSetting up the Hardware 188910 Connecting the NSS to the Network Connecting the Chassis to a Standard Power Outlet Connecting the PowerSupported UPS Product Families Connecting the Chassis to an Uninterruptible Power SupplyStarting the NSS Using the NSS3000 LCD Panel Setting up the Hardware Configuring the NSS Configuring the Computer Network SettingsSubnet Mask Http//IPaddressofNSSunit Logging into the Configuration InterfaceWelcome screen appears Click Run Discovery Tool Running the Quick Setup Wizards to Configure the NSS Saving the NSS Configuration Click Update Accessing the Network Storage Accessing the Storage using CIFS/SMBWindows Users NSS hostname\username Accessing the Storage through FTPUnix and Linux Users Accessing the Storage through NFSAccessing Storage through CIFS/SMB Mac UsersFrom the Finder’s Go menu, click Connect to Server NSS hostname\user name Accessing Storage through FTPNSS LEDs Power Button LEDNSS LEDs System LEDHard Disk Drive LEDs LAN LEDReset Button To restore the network setting system defaultsTo reset the NSS Unit Weight Device DimensionsPower CertificationAdditional Information Support Contacts