Cisco Systems NSS3000 Series manual Saving the NSS Configuration

Page 21

Configuring the NSS

3

 

Saving the NSS Configuration

 

 

 

 

 

stream video to the Windows camera utility program. After you run the wizard, you must map the network drive from the PC that runs the Windows utility program to the CIFS share and then set up the utility to save to the mapped network drive.

Saving the NSS Configuration

You can save a copy of the NSS configuration to use if you need to restore the settings at a later time. When you save the configuration file, it saves a date- stamped version of the current configuration settings to the specified volume on the NSS. You can choose to save the current configuration settings to a specified volume on the NSS or you can save the file to a USB flash device.

To save the current configuration:

STEP 1 If you are saving the configuration file to a USB flash device, insert a USB flash device into the AUX-1 port on the front panel of the NSS.

STEP 2 From the Manager Menu, click Admin Configuration.

The Configuration Manager page appears.

STEP 3 Select the location where the backup is saved from the Stored Configuration Location drop-down menu. To save the configuration file to a USB flash device, select the AUX-1 port as the location. You can then copy the configuration file from the USB flash device to another location on your network.

NSS3000 Series Network Storage System Getting Started Guide

17

Image 21
Contents Getting Started Guide Cisco Systems, Inc. All rights reserved OL-18629-01 Setting up the Hardware Contents IntroductionConfiguring the NSS Accessing the Network StorageAppendix B Specifications Appendix C Additional Information ContentsChapter a NSS LEDs Appendix D Support ContactsBenefits IntroductionApproved Vendor List for Drives About this GuideInstalling the Disk Drives Setting up the HardwareSetting up the Hardware 188910 Connecting the NSS to the Network Connecting the Chassis to a Standard Power Outlet Connecting the PowerSupported UPS Product Families Connecting the Chassis to an Uninterruptible Power SupplyStarting the NSS Using the NSS3000 LCD Panel Setting up the Hardware Configuring the NSS Configuring the Computer Network SettingsSubnet Mask Http//IPaddressofNSSunit Logging into the Configuration InterfaceWelcome screen appears Click Run Discovery Tool Running the Quick Setup Wizards to Configure the NSS Saving the NSS Configuration Click Update Accessing the Network Storage Accessing the Storage using CIFS/SMBWindows Users NSS hostname\username Accessing the Storage through FTPUnix and Linux Users Accessing the Storage through NFSAccessing Storage through CIFS/SMB Mac UsersFrom the Finder’s Go menu, click Connect to Server NSS hostname\user name Accessing Storage through FTPNSS LEDs Power Button LEDNSS LEDs System LEDHard Disk Drive LEDs LAN LEDReset Button To restore the network setting system defaultsTo reset the NSS Unit Weight Device DimensionsPower CertificationAdditional Information Support Contacts