Cisco Systems HWIC1FERF, HWIC-1FE Connecting Fast Ethernet HWICs to a Network, Related Documents

Page 4

Connecting 1- and 2-Port Fast Ethernet High-Speed WAN Interface Cards to the Network

Connecting Fast Ethernet HWICs to a Network

Connecting Fast Ethernet HWICs to a Network

To connect a Fast Ethernet HWIC to the network, do the following procedure:

Step 1 Confirm that the router is powered down.

Warning To comply with the Telcordia GR-1089 NEBS standard for electromagnetic compatibility and safety, connect the HWIC-1FE and HWIC-2FE interface cards only to intra-building or unexposed wiring or cable. The intrabuilding cable must be shielded and the shield must be grounded at both ends. The intra-building port(s) of the equipment or subassembly must not be metallically connected to interfaces that connect to the OSP or its wiring. These interfaces are designed for use as intra-building interfaces only (Type 2 or Type 4 ports as described in GR-1089-CORE, Issue 4) and require isolation from the exposed OSP cabling. The addition of Primary Protectors is not sufficient protection in order to connect these interfaces metallically to OSP wiring.

Step 2 Insert the Fast Ethernet HWIC into an HWIC slot on the router. (See Installing Cisco Interface Cards in Cisco Access Routers.)

Note Insert Fast Ethernet HWICs into HWIC slots only. They do not fit into WIC/VIC slots.

Step 3 Using the appropriate cables, connect the HWIC to your system.

Caution To comply with the Telcordia GR-1089 NEBS standard for electromagnetic compatibility and safety, connect the 1-port HWIC (HWIC-1FE) and 2-port HWIC (HWIC-2FE) only to intrabuilding or nonexposed wiring or cabling.

For 10BASE-T operation, Category 3, 4, or 5 UTP cable may be used, for distances of up to 328 feet (100 meters).

For 100BASE-TX operation, Category 5 UTP cable is required, for distances of up to 328 feet (100 meters).

The HWICs support Auto-MDIX, so either straight-through or crossover cable can be used.

Step 4 Power up the router.

Related Documents

For additional information, see the following documents and resources.

Related Topic

Document Title

 

 

Regulatory compliance and safety

Cisco Network Modules and Interface Cards Regulatory Compliance and Safety

information

Information

 

 

 

http://www.cisco.com/en/US/docs/routers/access/interfaces/rcsi/IOHrcsi.html

 

 

Cisco IOS software website and reference

Cisco IOS Software

documentation

http://www.cisco.com/web/psa/products/index.html?c=268438303

 

 

 

 

 

 

OL-12851-01

 

 

 

 

 

 

 

 

4

Image 4
Contents Fast Ethernet HWICs Standards Cisco 1- and 2-Port Fast Ethernet HWICsFast Ethernet HWICs Restrictions Fast Ethernet HWICs Supported Platforms Fast Ethernet HWICs Port NumberingChassis HWIC-1FE HWIC-2FELED Fast Ethernet HWICs LEDsMeaning States Related Documents Connecting Fast Ethernet HWICs to a NetworkRelated Topic Document Title OL-12851-01

HWIC-1FE, HWIC1FERF specifications

Cisco Systems, a leader in networking and communication technology, offers a variety of hardware solutions designed to enhance network performance and scalability. Among these offerings is the HWIC-1FE (High-Speed WAN Interface Card), a highly effective module designed for Cisco routers. The HWIC-1FE, sometimes referenced with the model number HWIC1FERF, provides robust features that cater to the needs of small to medium-sized businesses seeking reliable networking solutions.

One of the primary features of the HWIC-1FE is its ability to provide a single Fast Ethernet (10/100 Mbps) port, allowing for seamless connectivity to a wide range of devices. This makes it ideal for organizations looking to expand their network without the need for additional routers. With its small form factor and high-density slots, the HWIC-1FE effectively increases the versatility of Cisco routers, enabling businesses to customize their network architecture in a cost-efficient manner.

The module supports a variety of technologies, including IP routing, firewall functionalities, and Quality of Service (QoS). These features are essential for ensuring that critical applications receive the necessary bandwidth, thereby improving overall network performance and user experience. QoS capabilities allow administrators to prioritize traffic, ensuring that latency-sensitive applications can operate without interruption.

Another notable characteristic of the HWIC-1FE is its ease of installation and configuration. The module is designed to be plug-and-play, which simplifies the integration process into existing network environments. Cisco's intuitive command-line interface further facilitates configuration, providing users with the tools they need to optimize their network setup.

Additionally, the HWIC-1FE is built with reliability in mind. Cisco's reputation for robust hardware ensures that the module can withstand the rigors of operating in demanding environments. The HWIC-1FE is also backed by Cisco's extensive support infrastructure, offering maintenance and upgrades to keep networks running smoothly.

In summary, the Cisco HWIC-1FE is an essential component for businesses looking to enhance their network capabilities without extensive investment. With features focused on performance, reliability, and ease of use, it stands out as a preferred choice for organizations that require flexible network solutions tailored to their unique needs.