Cisco Systems quick start WLC526 System Information Screen

Page 11

To use the controller’s startup wizard, you will need an Ethernet-capable PC running Windows XP and an Ethernet cable. The controller’s default IP address is 192.168.1.1. Make sure your PC is configured to receive an IP address automatically. When the controller boots for the first time, it becomes a DHCP server and automatically assigns an IP address to your PC.

Note The default IP address and DHCP server are only available when the controller is configured with factory default values.

Follow these steps to start the wizard:

Step 1 Connect the Ethernet cable to the Ethernet port on your PC.

Step 2 Connect the other end of the Ethernet cable to data port 1 on the WLC526.

Step 3 Plug the supplied, country-specific power cord into the AC power receptical on the back of the controller.

Step 4 Plug plug the other end of the AC power cord into a grounded 100–240 VAC, 50/60 Hz electrical outlet.

Step 5 Power up the WLC526. The controller begins its boot process, which takes approximately 3 minutes.

Step 6 Open your web browser and browse to IP address 192.168.1.1. A network password screen appears.

Step 7 Enter admin for both the username and password (default value). The System Information screen appears (See Figure 3).

Figure 3 WLC526 System Information Screen

Step 8 For security reasons, you should change the username and password to non-default values. Enter a system name, a new username, and a new password in the respective fields.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Cisco 526 Wireless Express Mobility Controller About this Guide FCC Safety Compliance StatementSafety Information Overview Safety ConsiderationsPstn Related DocumentationUnpacking and Preparing the Controller for Operation Package Contents Moving a Controller Using the Startup WizardChoosing a Physical Location Wizard Setting Action Wlan ID Network name, or service set identifier WLC526 System Information Screen Management Interface Configuration Screen Miscellaneous Configuration Screen AP Manager Interface Configuration Screen Virtual Interface Configuration Screen Radius Server Configuration Screen Connecting Access Points Connecting to an Sbcs Compatible SwitchMounting on a Vertical Surface Mounting the WLC526 ControllerMounting on a Desktop or Shelf Inches Page Checking the Controller LEDs Case of DifficultyUsing the Reset Button Invalid or Unknown Controller IP Address Cisco One Year Limited Hardware Warranty TermsTo Receive a Return Materials Authorization RMA Number Duration of Hardware WarrantyReplacement, Repair, or Refund Policy for Hardware Varoitus Tärkeitä Turvallisuusohjeita Translated WarningsStatement 1071-Warning Definition Waarschuwing Belangrijke VeiligheidsinstructiesAvvertenza Importanti Istruzioni Sulla Sicurezza Warnung Wichtige SicherheitshinweiseAviso Instruções Importantes DE Segurança TA Vare PÅ Disse InstruksjoneneVarning! Viktiga Säkerhetsanvisningar Page Page Page Page Statement 1015-Battery Handling Page Statement 1024-Ground Conductor Page Page Statement 1040-Product Disposal Page Statement 371-Power Cable and AC Adapter Japan Page Page Page USA
Top Page Image Contents