Cisco Systems 526 quick start Wizard Setting Action

Table 1	Startup Wizard Information
Wizard Setting		Action
System Name		The name you want to assign to the controller.
		You can enter up to 32 ASCII characters.
Administrative user name and password		The administrative username and password to be
		assigned to this controller. You can enter up to 24
		ASCII characters for each.
		The default administrative username and
		password are both admin and admin.
Management Interface VLAN Identifier		The VLAN identifier of the management
		interface (a valid VLAN identifier or 0 for an
		untagged VLAN).
		The VLAN identifier should be set to match the
		switch interface configuration.
Management Interface IP Address		The management interface is the default interface
		for in-band management of the controller and
		connectivity to services such as AAA servers.
		You can access the controller’s GUI interface
		using this address.
Management Interface Netmask		Enter the IP address of the management interface
		netmask.
Management Interface Default Router		Enter the IP address of the default router.
Management Interface Port Number		Enter the port number of the access point
		manager interface. The default is 1.
Primary DHCP Server IP Address		The management interface DHCP server IP
		address. The default is 192.168.1.1.
Secondary DHCP server IP Address		The IP address of the a secondary DHCP server.
		The default is 0.0.0.0.
LWAPP Transport Mode		The default is Layer 3.
RF Mobility Domain Name		The name of the mobility group/RF group to
		which you want the controller to belong.
		The default is default.

8