Cisco Systems 526 About this Guide, FCC Safety Compliance Statement, Safety Information

Page 2

1About this Guide

This guide will help you install the Cisco 526 Series Wireless Express Mobility Controller (hereafter referred to as the WLC526 or the controller) in your Smart Business Communication System network.

FCC Safety Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on.

Try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help. (cfr reference 15.105)

Safety Information

Safety warnings appear throughout this guide in procedures that may harm you if performed incorrectly. A warning symbol precedes each warning statement. The warnings below are general warnings that are applicable to the entire guide. Translated versions of the safety warnings in this guide are provided in the “Translated Warnings” section on page 25.

Warning

This warning symbol means danger. You are in a situation that could cause bodily injury.

 

Before you work on any equipment, be aware of the hazards involved with electrical

 

circuitry and be familiar with standard practices for preventing accidents. Use the

 

statement number provided at the end of each warning to locate its translation in the

 

translated safety warnings that accompanied this device. Statement 1071

 

SAVE THESE INSTRUCTIONS

 

 

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Cisco 526 Wireless Express Mobility Controller About this Guide FCC Safety Compliance StatementSafety Information Safety Considerations OverviewRelated Documentation PstnUnpacking and Preparing the Controller for Operation Package Contents Moving a Controller Using the Startup WizardChoosing a Physical Location Wizard Setting Action Wlan ID Network name, or service set identifier WLC526 System Information Screen Management Interface Configuration Screen Miscellaneous Configuration Screen AP Manager Interface Configuration Screen Virtual Interface Configuration Screen Radius Server Configuration Screen Connecting to an Sbcs Compatible Switch Connecting Access PointsMounting on a Vertical Surface Mounting the WLC526 ControllerMounting on a Desktop or Shelf Inches Page Case of Difficulty Checking the Controller LEDsUsing the Reset Button Cisco One Year Limited Hardware Warranty Terms Invalid or Unknown Controller IP AddressTo Receive a Return Materials Authorization RMA Number Duration of Hardware WarrantyReplacement, Repair, or Refund Policy for Hardware Waarschuwing Belangrijke Veiligheidsinstructies Translated WarningsStatement 1071-Warning Definition Varoitus Tärkeitä TurvallisuusohjeitaWarnung Wichtige Sicherheitshinweise Avvertenza Importanti Istruzioni Sulla SicurezzaTA Vare PÅ Disse Instruksjonene Aviso Instruções Importantes DE SegurançaVarning! Viktiga Säkerhetsanvisningar Page Page Page Page Statement 1015-Battery Handling Page Statement 1024-Ground Conductor Page Page Statement 1040-Product Disposal Page Statement 371-Power Cable and AC Adapter Japan Page Page Page USA
Top Page Image Contents