Cisco Systems quick start Power Up the Cisco AS5300

Page 14

Warning The illustration shows the DC power supply terminal block. Wire the DC power supply using the appropriate wire terminations at the wiring end, as illustrated. The proper wiring sequence is ground to ground, positive to positive, and negative to negative. Note that the ground wire should always be connected first and disconnected last.

Caution In a DC power supply installation do not connect the -48 VDC return to chassis ground at the Cisco AS5300. A single-point ground is recommended at the power distribution rack.

Step 2 Strip off a quarter of an inch (1/4 in. [0.625 cm]) of insulation on the safety ground, +48 VDC, and -48 VDC input wires.

Step 3 Install the safety ground (green wire) into the terminal block ground connector and tighten the locking screw. Ensure that no bare wire is exposed.

Caution Do not overtorque the terminal block contact screws. The recommended torque is 8.2 ± 0.4 inch-lb.

Step 4 Insert the +48 VDC wire into the terminal block positive connector (+) and tighten the locking screw. Ensure that no bare wire is exposed.

Step 5 Insert the -48 VDC wire into the terminal block negative connector (-) and tighten the locking screw. Ensure that no bare wire is exposed.

Step 6 Secure the power supply cord to the cable strain-relief clamps on the DC power supply with cable ties.

Warning After wiring the DC power supply, remove the tape from the circuit breaker switch handle and reinstate power by moving the handle of the circuit breaker to the ON position.

Mounting screw

Mounting screw

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Terminal

block

Mounting screw

Strain-relief

clamp

On/off switch

H10720

Power Up the Cisco AS5300

Power up the access server. The internal power supply fan should power on. Messages will begin to appear on your console screen.

Caution After you start the Cisco AS5300, it might take several minutes for the startup messages to stop. Do not press any keys until you see the following message:

Would you like to enter the initial configuration dialog? [yes]:

While you are waiting for this message to appear, proceed to Section 3 Gather Configuration Information.

14

Image 14
Contents Cisco AS5300 Universal Access Server Cisco AS5300 Documentation Documents, Equipment, and ToolsUser Documentation Cisco IOS Software Documentation Release NotesItems Included with Cisco AS5300 Items Not IncludedInstall the Cisco AS5300 Prepare the Chassis for Rack-MountingPrepare the Chassis for Desktop Use Connect the Ethernet Port for LAN Access Connect the T1/PRI Card for WAN Access Connect the E1/PRI Card for WAN Access Connect the Serial Port for WAN Access Connect a Console for Local Administrative Access Connect a Modem for Remote Administrative Access Optional Wiring the DC Power Supply Connect PowerConnecting the AC Power Cord Power Up the Cisco AS5300 Gather Configuration Information Ask Your Network AdministratorARA? Install and Run Cisco Fast Step Configure the Cisco AS5300Using Cisco Fast Step Software Cisco Fast Step SoftwareCisco IOS Release Setup Script Configure the Cisco AS5300Initial Configuration Using the CLI Manual Configuration When the following prompt appears, enter yes to continueConfiguring VoIP Where to Go NextDocumentation CD-ROM Obtaining DocumentationWorld Wide Web Ordering DocumentationCisco.com Contacting TAC by Using the Cisco TAC WebsiteObtaining Technical Assistance Technical Assistance CenterContacting TAC by Telephone USA
Related manuals
Manual 6 pages 32.91 Kb

AS5300 specifications

Cisco Systems has long been a leader in the networking and telecommunications field, and its AS5800 series of routers exemplify this tradition. The AS5800, along with the AS5850, AS5350, AS5400, and AS5300, provides robust solutions for service providers and enterprise-level networking applications. Each of these models has distinct features and characteristics that cater to the evolving demands of internet traffic and data processing.

The Cisco AS5800 is designed for high-capacity routing and optimized for broadband services. It supports a wide range of services, including voice, data, and video applications, making it a versatile option for service providers looking to deliver integrated solutions. It is equipped with advanced quality of service (QoS) features that ensure bandwidth is allocated effectively, holding strong even under heavy traffic conditions.

In comparison, the AS5850 offers superior processing capabilities and is typically utilized in larger-scale implementations. This model supports high-density interfaces, allowing numerous connections without compromising performance. Its architecture includes enhanced MPLS (Multiprotocol Label Switching) support, enabling more efficient traffic management and better utilization of network resources.

The AS5350 is known for its scalability and energy efficiency, ideal for voice-over-IP (VoIP) and media gateway applications. It supports various telephony features, such as protocol interworking and transcoding, making it a preferred choice for organizations focusing on digital voice technologies. The AS5300, while slightly older, continues to be a valuable asset for less demanding networks, offering reliable performance with VoIP capabilities and basic data applications.

The AS5400 bridges the gap between high-performance routing and operational efficiency. It incorporates Cisco's proprietary technologies to ensure seamless connectivity and robust failover systems. This model is highly regarded for its security features, protecting network integrity and providing peace of mind for businesses relying on sensitive data transfer.

Overall, Cisco’s AS5800 series showcases a progressive evolution of routing capabilities with enhanced features tailored for resilience, scalability, and performance. These routers not only address the technical needs of modern networks but also strategically position organizations for future growth in an increasingly digital world. Each model, with its unique attributes, continues to support the varied demands of global communication infrastructures.