1 USB | Use this connector to attach a device that requires a USB connection, |
| such as a keyboard, mouse, scanner, printer, or personal digital |
| assistant (PDA). |
2 Serial | Use this connector to attach an external modem, serial printer, or |
| other device that uses a |
3 Ethernet | Use this connector to attach the computer to an |
| area network or to a cable modem. |
| Important: To operate the computer within FCC limits when it is |
| connected to an Ethernet network, use a Category 5 Ethernet cable. |
9. Connect the power cords to properly grounded electrical outlets.
Note: For more information about connectors, refer to the Access Help online help system. See “AccessHelp” on page 42 for instructions on how to open the online help system.
Turning on computer power
Turn on the monitor and other external devices first, and then turn on the computer. When the
If you experience any problems during startup, see Chapter 7, “Troubleshootingand diagnostics,” on page 25. For additional help, refer to Chapter 9, “Getting information, help, and service,” on page 41. You can get help and information by telephone through the Customer Support Center. Refer to the safety and warranty information that is provided with your computer for the Service and Support worldwide telephone list.
Finishing the software installation
Important
Read the license agreements carefully before using the programs on this computer. These agreements detail your rights, obligations, and warranties for the software on this computer. By using these programs, you accept the terms of the agreements. If you do not accept the agreements, do not use the programs. Instead, promptly return the entire computer for a full refund.
The first time you start your computer, follow the instructions on the screen to complete the software installation. If you do not complete the software installation the first time the computer is turned on, unpredictable results might occur. When the
8User Guide