Cisco Systems Detailed Cisco 10000 Datasheet for 1-Port Gigabit Ethernet Half-Height Line Card

C H A P T E R 10

1-Port Gigabit Ethernet Half-Height Line Card Overview

This chapter describes the Cisco 10000 series 1-port Gigabit Ethernet half-height line card (referred to as the 1-port Gigabit Ethernet half-height line card), and contains the following sections:

•Line Card Summary, page 10-1

•Software and Hardware Compatibility, page 10-3

•Line Card, Router, and Processor Compatibility, page 10-3

•LEDs, page 10-4

•Physical Specifications, page 10-5

•Slot Locations, page 10-6

•Cables and Connectors, page 10-7

•SFP Module Configurations and Specifications, page 10-9

Line Card Summary

Table 10-1		1-Port Gigabit Ethernet Half-Height Line Card Summary
	Product Number		Description	Minimum Cisco IOS Release
	ESR-HH-1GE=		1-Port Gigabit Ethernet line card	Initial Cisco IOS releases for PRE-1:
				12.0(23)S and later releases of Cisco IOS 12.0S
				Initial Cisco IOS releases for PRE-2:
				12.2(15)BX and later releases of Cisco IOS 12.2BX
				12.2(28)SB and later releases of Cisco IOS
				Release 12.2SB
				12.3(7)XI and later releases of Cisco IOS 12.3 XI
				Initial Cisco IOS releases for PRE-3:
				12.2(31)SB2 and later releases of 12.2SB2
				For registered Cisco.com users, use Software Advisor
				to determine the software releases for this line card.
	ESR-HH-CARRIER=		Full-length base carrier for half-slot line card	—
			Cisco 10000 Series Routers Line Card Hardware Installation Guide
	OL-6773-04				10-1