Install the CTX2500 Cards
CRAFT Port
•An
•The craft interface is set to 9600 baud, no parity, and 1 stop bit by default.
Nonvolatile Memory
The ONS
•128 MB, Compact Flash card
Install the CTX2500 Cards
Warning Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement 1029
Warning During this procedure, wear grounding wrist straps to avoid electrostatic discharge (ESD) damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Warning Invisible laser radiation could be emitted from the end of the unterminated fiber cable or connector. Do not stare into the beam directly with optical instruments. Viewing the laser output with certain optical instruments (for example, eye loupes, magnifiers, and microscopes) within a distance of 100 mm could pose an eye hazard. Statement 1056
Warning Class I (CDRH) and Class 1M (IEC) laser products. Statement 1055
Warning Use of controls, adjustments, or performing procedures other than those specified may result in hazardous radiation exposure. Statement 1057
Caution Do not install a CTX2500 card in an ONS
Caution Always use the supplied ESD wristband when working with a powered ONS
Installing the CTX2500 Card in the Cisco ONS
| 5 |
| |
|
|