Chapter 3: Installing the Chassis in an Equipment Rack
3.Insert one end of the grounding wire into the grounding lug, as shown in Figure 43, and use a crimping tool to secure the wire to the grounding lug.
Figure 43. Attaching the Grounding Wire to the Grounding Lug
4.Install the grounding lug on the rear panel of the chassis, as shown in Figure 44. Allied Telesis recommends tightening the screws to
20 inch-lbs.
Figure 44. Installing the Grounding Lug and Wire
5.Connect the other end of the grounding wire to the building protective earth.
6.Go to Chapter 4, “Installing the Power Supplies” on page 89.
88
