SwitchBlade x8106 Chassis Switch Installation Guide
Installing a New
AT-SBxFAN06
Fan Module
Figure 156. Removing the AT-SBxFAN06 Fan Module from the Chassis
This procedure assumes that you have already removed the old fan module from the chassis and are continuing directly from the previous procedure, “Removing the AT-SBxFAN06 Fan Module” on page 226. To install the new fan module, perform the following procedure
1.Orient the new module with the LED and module name on top and carefully slide the module into the slot in the chassis. Refer to Figure 157 on page 230.
229
