Figure 5. Removing the system stand hinge cover

6.To reinstall the system stand hinge cover, place the system stand hinge cover on the computer so that the plastic tab on the hinge cover aligns with the corresponding hole in the computer.

7.Reinstall the screw to secure the system stand hinge cover to the computer.

Figure 6. Reinstalling the screw to secure the system stand hinge cover to the computer

Removing and reinstalling the system stand

Attention

Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the Safety, Warranty, and Setup Guide that came with your computer. To obtain a copy of the Safety, Warranty, and Setup Guide, go to:

http://www.lenovo.com/support

This section provides instructions on how to remove and reinstall the system stand.

68Lenovo S710 All-In-OneHardware Maintenance Manual

Page 74
Image 74
Lenovo S710 manual Removing and reinstalling the system stand, Removing the system stand hinge cover