Lenovo S710 manual Replacing the optical drive, Removing the hard disk drive from the bracket

Figure 12. Removing the hard disk drive from the bracket

7.To install the new hard disk drive into the bracket, slide the hard disk drive in and align the four screw holes with those in the bracket.

8.Install the four screws that secure the hard disk drive to the hard disk drive bracket.

9.Align the slots in the hard disk drive bracket with the tabs in the chassis. Then, slide the hard disk drive with the bracket in to connect the hard disk drive connector.

Figure 13. Installing the hard disk drive

10.Install the screw to secure the hard disk drive bracket to the chassis.

11.Go to “Completing the parts replacement” on page 96.

Replacing the optical drive

Attention

Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the Safety, Warranty, and Setup Guide that came with your computer. To obtain a copy of the Safety, Warranty, and Setup Guide, go to:

http://www.lenovo.com/support

74Lenovo S710 All-In-OneHardware Maintenance Manual