Lenovo S710 manual Replacing the microprocessor fan, Removing the system board shield

6.Remove the two screws that secure the system board shield, and then slide the system board shield out of the computer.

Figure 17. Removing the system board shield

7.To reinstall the system board shield, align the tabs in the system board shield with the slots in the computer. Then, slide the system board shield in so that the screw holes align with those in the computer.

Figure 18. Installing the system board shield

8.Reinstall the screws to secure the system board shield to the computer.

9.Go to “Completing the parts replacement” on page 96.

Replacing the microprocessor fan

Attention

Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the Safety, Warranty, and Setup Guide that came with your computer. To obtain a copy of the Safety, Warranty, and Setup Guide, go to:

http://www.lenovo.com/support

This section provides instructions on how to replace the microprocessor fan.

Chapter 9. Replacing FRUs 77