Chapter 7: Powering On the Chassis
The components of the power supply are identified in Figure 103.
Positive (+)
Terminal
Plastic
Cover
Locking
Handle
Negative
Terminal Switch
Locking
Handle
Screw
Ground Post with Nut and Washer
Figure 103. Components of the AT-SBxPWRSYS1 DC Power Supply
Warning
As a safety precaution, install a circuit breaker with a minimum value of 50 Amps between the equipment and the DC power source.
Always connect the wires to the LAN equipment first before you connect the wires to the circuit breaker. Do not work with HOT feeds to avoid the danger of physical injury from electrical shock. Always be sure that the circuit breaker is in the OFF position before connecting the wires to the breaker. E9
Warning
For centralized DC power connection, install only in a restricted access area. E23
Note
