Installing the Chassis in an Equipment Rack

This chapter describes how to install the AT-SBx8106 Chassis in an equipment rack. This chapter contains the following sections:

“Required Tools and Material” on page 72

“Preparing the Equipment Rack” on page 73

“Unpacking the AT-SBx8106 Chassis” on page 76

“Removing the Rubber Feet” on page 78

“Adjusting the Equipment Rack Brackets” on page 80

“Installing the Chassis in the Equipment Rack” on page 82

“Removing the Shipping Brace” on page 86

“Installing the Chassis Grounding Lug” on page 87

Allied Telesis X8106 manual Installing the Chassis in an Equipment Rack