Allied Telesis X8106 manual

SwitchBlade x8106 Chassis Switch Installation Guide

Figure 79. Tightening the Thumbscrews on a Blank Slot Cover

3.Tighten the two screws with a # 2 Phillips-head screwdriver to secure the blank slot cover to the chassis.

Allied Telesis recommends tightening the screws to 5 inch-lbs.

4.Repeat this procedure to cover the remaining empty slots with blank slot covers.

5.Store any unused blank panels in a secure location for future use.

6.Go to Chapter 6, “Installing the Transceivers and Cabling the Ports” on page 125.

123