Chapter 6: Installing the Transceivers and Cabling the Ports
Figure 85. Removing the Dust Cover from the SFP Transceiver in the AT-
SBx81GS24a Line Card
Note
The dust cover protects the fiber optic port on the SFP transceiver from dust contamination. It should not be removed until you are ready to connect the fiber optic cable.
6.Before connecting the cable, verify the position of the handle on the SFP transceiver. The handle should be in the up position if the transceiver is in the top row on the line card, as shown in Figure 86, or the down position if the transceiver is in the bottom row.
Handle
Figure 86. Verifying the Position of the Handle on the SFP Transceiver on
