Safety information

7

Safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations.

Use care when you replace a lithium battery.

CAUTION—POTENTIAL INJURY: There is a danger of explosion if a lithium battery is incorrectly replaced. Replace it only with the same or an equivalent type of lithium battery. Do not recharge, disassemble, or incinerate a lithium battery. Discard used batteries according to the manufacturer's instructions and local regulations.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching.

CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed.

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY: Before moving the scanner, follow these guidelines to avoid personal injury or scanner damage:

Turn off the scanner using the power switch, and then unplug the power cord from the wall outlet.

Disconnect all cords and cables from the scanner before moving it.

CAUTION—POTENTIAL INJURY: Follow these guidelines to avoid personal injury or scanner damage:

Make sure your fingers are not under the scanner when you set it down.

Put the scanner on a flat and stable surface.

Before setting up the scanner, make sure there is adequate clearance around it.

CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage:

Turn off the printer, and then unplug the power cord from the electrical outlet.

Disconnect all cords and cables from the printer.

If two or more optional finishers are installed, then remove the finishers individually from the printer.

Notes:

Make sure to remove the topmost finisher first.

To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher.

If the printer does not have a caster base but is configured with optional trays, then remove the trays.

Note: Slide the latch on the right side of the optional tray toward the front of the tray until it clicks into place.

Use the handholds located on both sides of the printer to lift it.

Make sure your fingers are not under the printer when you set it down.

Make sure there is adequate clearance around the printer.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Use only the power cord provided with this product or the manufacturer's authorized replacement.

Page 7
Image 7
Lexmark MX6500E manual Safety information

MX6500E specifications

The Lexmark MX6500E is a multifunction printer designed specifically for medium to large workgroups that require high-volume printing and advanced features. This robust machine combines printing, scanning, copying, and faxing capabilities in a single unit, making it a versatile solution for business environments.

One of the standout features of the MX6500E is its printing speed. It can produce up to 55 pages per minute, allowing users to complete large tasks efficiently without unnecessary delays. This speed is complemented by a first page out time of just a few seconds, ensuring quick access to documents when needed.

In terms of print quality, the MX6500E delivers impressive results with its maximum print resolution of 1200 x 1200 dpi. This level of clarity is essential for producing professional-grade documents that require sharp text and detailed graphics. Additionally, the printer employs Lexmark's Unison toner technology, which provides consistent quality and reduces the frequency of cartridge replacements, ultimately lowering overall printing costs.

The MX6500E is equipped with a range of connectivity options to adapt to various office environments. It supports USB, Ethernet, and optional wireless connectivity, allowing users to print from different devices effortlessly. Furthermore, it is compatible with mobile printing protocols such as Apple AirPrint and Google Cloud Print, providing added convenience for users on the go.

Security is a significant focus for the MX6500E. It includes advanced features such as secure printing, user authentication, and data encryption. These capabilities help protect sensitive information and comply with organizational policies, making it a suitable choice for industries that handle confidential data.

The device also offers a large touchscreen interface, simplifying the navigation of various functions and settings. This intuitive control panel enhances user experience and increases productivity by allowing for quick access to frequently used tasks.

In summary, the Lexmark MX6500E is a powerful multifunction printer designed for efficiency and quality in demanding office settings. With high-speed printing, advanced security features, and a user-friendly interface, it meets the needs of businesses looking to enhance their productivity while maintaining a focus on print quality and operational security. Whether for everyday documents or more specialized print jobs, the MX6500E stands as a reliable choice for any workgroup.