Lexmark MX6500E manual Understanding the printer menus 207, Color Balance

Understanding the printer menus		207
	Use	To
	Color Balance	Enable an equal balance of colors in the output.
	Cyan - Red
	Magenta - Green
	Yellow - Blue
	Color Dropout	Specify which color to drop during scanning, and how much the dropout is increased
	Color Dropout	or decreased.
	None	Notes:
	Red	• None is the factory default setting for Color Dropout.
	Green
		• 128 is the factory default setting for each color threshold.
	Blue
	Default Red Threshold
	0–255
	Default Green Threshold
	0–255
	Default Blue Threshold
	0–255
	Contrast	Specify the contrast of the output.
	0–5	Note: “Best for content” is the factory default setting.
	Best for content
	Mirror Image	Create a mirror image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Negative Image	Create a negative image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Shadow Detail	Adjust the amount of shadow detail visible on a scanned image.
	‑4 to 4	Note: 0 is the factory default setting.
	ADF Skew Fix	Correct the slight skew in the scanned image.
	Auto	Note: Off is the factory default setting.
	Off
	On
	ADF Multi‑feed Sensor	Detect when the ADF picks more than one sheet of paper at once.
	On	Note: On is the factory default setting.
	Off
	Scan edge to edge	Specify whether the original document is scanned edge-to-edge.
	Off	Note: Off is the factory default setting.
	On
	Sharpness	Adjust the amount of sharpness on a scanned image.
	1–5	Note: 3 is the factory default setting.
	Temperature	Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a bluer
	‑4 to 4	output than the default while “warm” values generate a redder output than the
		default.