Lexmark MX6500E manual Install Tray, Insufficient memory for Flash Memory Defragment operation

Troubleshooting 295

Install Tray [x]

Try one or more of the following:

•Install the specified tray:

1Turn off the printer and the scanner.

2Unplug the power cord from the electrical outlet.

3Install the specified tray.

4Connect the power cord to a properly grounded electrical outlet.

5Turn on the printer and the scanner.

•Cancel the print job.

•Reset the active bin.

Insufficient memory for Flash Memory Defragment operation [37]

Try one or more of the following:

•From the scanner control panel, touch Continue to stop the defragmentation and continue printing.

•Delete fonts, macros, and other data in the printer memory.

•Install additional printer memory.

Insufficient memory to collate job [37]

Try one or more of the following:

•From the scanner control panel, touch Continue to print the part of the job already stored and to begin collating the rest of the print job.

•Cancel the current print job.

Insufficient memory to support Resource Save feature [35]

Install additional scanner memory or touch Continue to disable Resource Save, to clear the message, and to continue printing.

Insufficient memory, some Held Jobs were deleted [37]

From the scanner control panel, touch Continue to clear the message.

Insufficient memory, some held jobs will not be restored [37]

Try one or more of the following:

•From the scanner control panel, touch Continue to clear the message.

•Delete other held jobs to free up additional scanner memory.