Lexmark MX6500E manual Understanding the printer menus 199

Understanding the printer menus		199
	Use	To
	Mirror Image	Create a mirror image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Negative Image	Create a negative image of the original document.
	Off	Note: Off is the factory default setting.
	On
	Shadow Detail	Adjust the amount of shadow detail visible.
	‑4 to 4	Note: 0 is the factory default setting.
	ADF Skew Fix	Correct the slight skew in the scanned image.
	Auto	Note: Auto is the factory default setting.
	Off
	On
	ADF Multi-feed Sensor	Allow the scanner to detect when the ADF picks more than one sheet of paper at once.
	On	Note: On is the factory default setting.
	Off
	Scan edge to edge	Specify if the original document is scanned edge-to‑edge prior to faxing.
	Off	Note: Off is the factory default setting.
	On
	Sharpness	Adjust the sharpness of a fax.
	1–5	Note: 3 is the factory default setting.
	Temperature	Specify “warm” or “cool” outputs. “Cool” values generate a bluer output than the
	‑4 to 4	default while “warm” values generate a redder output than the default.
		Note: 0 is the factory default setting.
	Use	To
	Enable Fax Receive	Allow the printer to receive fax jobs.
	On	Note: On is the factory default setting.
	Off
	Fax Job Waiting	Remove fax jobs from the print queue when the job requires specific unavailable
	None	resources.
	Toner	Note: None is the factory default setting.
	Toner and Supplies
	Rings to Answer	Specify the number of rings before answering an incoming fax job.
	1–25	Note: 3 is the factory default setting.
	Auto Answer	Allow the scanner to answer an incoming fax job.
	Yes	Note: Yes is the factory default setting.
	No