Lexmark MX6500E manual Security Audit Log menu, Set Date and Time menu

Understanding the printer menus 181

Security Audit Log menu

Use	To
Export Log	Let an authorized user export the audit log.
	Notes:
	• To export the audit log from the scanner control panel, a flash drive must be
	attached to the scanner.
	• The audit log can be downloaded from the Embedded Web Server and saved
	on a computer.
Delete Log	Specify whether to delete audit logs.
Yes	Note: Yes is the factory default setting.
No
Configure Log	Configure the printer to record events in the secure audit log.
Enable Audit	Notes:
Yes
	• Enable Audit determines if events are recorded in the secure audit log and
No
	remote syslog. No is the factory default setting.
Enable Remote Syslog
	• Enable Remote Syslog determines if logs are sent to a remote server. No is the
No
	factory default setting.
Yes
	• Remote Syslog Facility determines the value used to send logs to the remote
Remote Syslog Facility
	syslog server. 4 is the factory default setting.
0–23
	• If the security audit log is activated, then the severity value of each event is
Severity of events to log
	recorded. 4 is the factory default setting.
0–7

Set Date and Time menu

Use	To
Current Date and Time	View the current date and time settings for the scanner.
Manually Set Date and Time	Enter the date and time.
	Note: Date/Time is set in YYYY-MM-DD HH:MM:SS format.
Time Zone	Select the time zone.
	Note: GMT is the factory default setting.
Automatically Observe DST	Set the scanner to use the applicable daylight saving time (DST) start and end times
On	associated with the scanner Time Zone setting.
Off	Note: On is the factory default setting and uses the applicable Daylight Saving Time
	associated with the Time Zone setting.