Lexmark MX6500E manual Customizing fax settings, Changing the fax resolution, Viewing a fax log

Faxing 137

Customizing fax settings

Changing the fax resolution

Settings range from Standard (fastest speed) to Ultra Fine (slowest speed, best quality).

1Load an original document facedown into the ADF or on the scanner glass.

Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.

2If you are loading a document into the ADF, then adjust the paper guides.

3From the home screen, navigate to: Fax > enter the fax number > Options

4From the Resolution area, touch the arrows to change to the resolution you want.

5Touch Fax It.

Making a fax lighter or darker

1Load an original document facedown, long edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

•The ADF indicator light comes on when the paper is loaded properly.

2If you are loading a document into the ADF tray, then adjust the paper guides.

3From the home screen, navigate to: Fax > enter the fax number > Options

4Adjust the fax darkness, and then touch Fax It.

Viewing a fax log

1Type the scanner IP address in the address field of your Web browser.

If you do not know the IP address or host name of the scanner, then you can:

•View the information on the scanner control panel home screen, or in the TCP/IP section under the Networks/Ports menu.

•Print a network setup page or menu settings page and locate the information in the TCP/IP section.

2Click Settings > Reports > Fax Job Log or Fax Call Log.

Blocking junk faxes

1Type the scanner IP address in the address field of your Web browser.