Allied Telesis X8106 manual

SwitchBlade x8106 Chassis Switch Installation Guide

3.Use the twist tie that comes with the power supply to secure the cord to an anchor on the chassis, as shown in Figure 101.

Anchor

Figure 101. Securing the Power Cord for the AT-SBxPWRPOE1 Power

Supply to an Anchor

4.Connect the power cord to an appropriate AC power source to power on the power supply.

5.If the chassis has two AT-SBxPWRPOE1 Power Supplies, repeat this procedure to power on the second power supply.

Figure 102 on page 150 is an illustration of the power cords for a chassis with four power supplies.

149