SwitchBlade x8106 Chassis Switch Installation Guide

Figure 73. Tightening the Thumb Screws on the AT-SBx81CFC400 Card

10.Tighten the screws with a #2 Phillips-head screwdriver to secure the controller card to the chassis.

Allied Telesis recommends tightening the screws to 5 inch-lbs.

11.if you have a second AT-SBx81CFC400 Controller Fabric Card, repeat this procedure to install it in the chassis.

12.Go to “Installing the Ethernet Line Cards” on page 118.

117

Page 117
Image 117
Allied Telesis X8106 manual 117