Chapter 1: Overview
AT-SBx81GS24a Line Card
Table 7. Port LEDs on the AT-SBx81GP24 PoE Line Card (Continued)
LED | State | Description |
|
|
|
|
|
|
PoE | Off | This LED state can result from the following |
|
| conditions: |
|
| The port is not connected to a PD. |
|
| The PD is powered off. |
|
| The port is disabled in the management |
|
| software. |
|
| PoE is disabled on the port. |
|
| The LEDs on the Ethernet line cards are |
|
| turned off. To turn on the LEDs, use the |
|
| |
|
|
|
The SFP slots on the
Figure 20. Port LEDs on the AT-SBx81GS24a SFP Line Card
Table 8. Port LEDs on the
LED State | Description |
|
|
|
|
Solid Amber | The SFP transceiver in the slot has established a |
| 10 or 100 Mbps link to a network device. |
|
|
Blinking Amber | The SFP transceiver is transmitting and/or |
| receiving data at 10 or 100 Mbps. |
|
|
Solid Green | The SFP transceiver in the slot has established |
| an 1000 Mbps link to a network device. |
|
|
Blinking Green | The SFP transceiver is transmitting and/or |
| receiving data at 1000 Mbps. |
|
|
42
