Allied Telesis X8106 manual Unpacking the AT-SBx8106 Chassis, Components of the AT-SBx8106 Chassis

Chapter 3: Installing the Chassis in an Equipment Rack

Unpacking the AT-SBx8106 Chassis

To unpack the AT-SBx8106 Chassis, perform the following procedure:

1.Remove all components from the shipping package.

2.Verify the contents of the shipping container by referring to Figure 31 here and Figure 32 on page 77. If any item is missing or damaged, contact your Allied Telesis sales representative for assistance.

One AT-SBx8106 Chassis

One AT-SBxFAN06 Module pre- installed in the vertical slot on the right side of the front panel

Four blank line card slot covers

Three blank power supply slot covers pre-installed in power supply slots A to C on the front panel

One grounding lug pre-installed in the lower left corner on the back panel

Figure 31. Components of the AT-SBx8106 Chassis

76