Allied Telesis X8106 manual 131

SwitchBlade x8106 Chassis Switch Installation Guide

3.To install the transceiver in an SFP slot on the top row of the line card, orient the transceiver with the handle on top, as shown in Figure 83. To install it into a slot on the bottom row of the line card, orient it with the handle on the bottom.

Handle

Figure 83. Handle on SFP Transceiver

4.Slide the transceiver into the slot until it clicks into place, as shown in Figure 84.

Figure 84. Inserting the SFP Transceiver in the AT-SBx81GS24a Line

Card

Note

If you are ready to attach the fiber optic cable to the transceiver, continue with the next step. Otherwise, repeat steps 1 to 4 to install the remaining SFP transceivers in the line cards.

5.Remove the protective cover from the SFP transceiver, as shown in Figure 85 on page 132.

131