Technicolor - Thomson RCR311B Battery Installation and Information, Battery Saver, Backlighting

Three-Component

Universal Remote

Congratulations on your purchase of this three-component universal remote. This universal remote controls up to three electronic components and makes juggling remote controls a thing of the past. You can program your RCA brand universal remote to operate most models of most brands of infrared, remote-controlled components manufactured after 1990.

(See the enclosed Code Lists for a complete list of brands.) The three-component universal remote is easy to use, easy to program and gives you control at the touch of your fingertips.

The three-component universal remote is already programmed to operate most RCA, GE and PROSCAN branded TVs, DVD players and satellite receivers. Just press the corresponding key—VCR•DVDfor a DVD player; TV for

a television; SAT•CBL for a satellite receiver or a cable box.

Battery Installation and Information

Your universal remote requires two AA Alkaline batteries (batteries may or may not be included, depending on model). To install the batteries:

1. Remove the battery compartment cover.

2. Insert the batteries, matching

the batteries to the (+) and (-) marks inside the battery compartment.

3.Press and push the battery cover back into place.

Note: Reprogramming may be required after batteries are replaced.

Battery Saver

Your universal remote control saves battery power by automatically turning off if any key is pressed for more than 60 seconds. This saves your batteries should your remote get stuck in a place where the keys remain depressed, such as between sofa cushions.

Backlighting

	Backlight illumination (available on select
	models only) enables you to see the remote
	control keys better in the dark. Backlight
BACKLIGHT	illumination is toggled on or off with
	successive keypresses of the BACKLIGHT
	key. When toggled on, the backlighting
	remains on as long as keys are being pressed.
	The backlighting turns off six seconds after
	the last keypress. Once the backlight time
	has expired, any keypress will reactivate
	backlighting. If the backlight illumination
	is on, and the BACKLIGHT key is pressed,
	the backlight turns off.

3