Lexmark S500 Wireless print server not installed, Configure The Printer For Wireless Access Again

If the printer does not respond, then nothing is displayed.

•Your computer might not be connected to the network. You can use Network Diagnostics to help resolve the problem.

•You may need to change the settings of your printer. Run the Wireless Setup Assistant again.

CONFIGURE THE PRINTER FOR WIRELESS ACCESS AGAIN

If your wireless settings have changed, you must run the printer wireless setup again. Some reasons your settings may have changed include your having manually changed your WEP or WPA keys, channel, or other network settings; or the access point having been reset to factory defaults.

Running the wireless setup again can also resolve issues due to misconfigurations that occurred when configuring the printer for wireless access.

Notes:

•If you change network settings, change them on all the network devices before changing them for the access point.

•If you have already changed the wireless network settings on your access point, then you must change the settings on all the other network devices before you can see them on the network.

For Windows users

1Click or Start.

2Click All Programs or Programs, and then select the printer program folder from the list.

3Select Printer Home.

4Click the Settings tab.

5Click the Wireless setup utility link.

Note: You may be prompted to connect the printer to the computer again using the installation cable as part of the setup process.

6Follow the instructions on the computer screen.

For Macintosh users

1From the Finder desktop, double-click the printer folder.

2Double-clickWireless Setup Assistant.

3Follow the instructions on the computer screen.

Wireless print server not installed

You may see a message during installation indicating that the printer does not have a wireless print server installed. If you are sure the printer is capable of wireless printing, try the following:

CHECK POWER

Make sure the light is on.

Troubleshooting

117